Feed drum dryer

During the drying process, the material moves from the higher end to the lower end under the action of gravity, thanks to the slow rotation of the cylinder. The inner wall of the cylinder is equipped with a forward facing plate, which continuously picks up and sprinkles the material, greatly enhancing the thermal contact surface of the material, improving the drying rate, and promoting the material to move forward. After drying the material with a heat carrier (hot air, flue gas), the narrow dust is collected through a cyclone dust collector and then discharged.

1. Chemical industry: ammonium sulfate, alkali sulfide, Anfu powder, ammonium nitrate, urea, oxalic acid, potassium dichromate, polyvinyl chloride, nitrate phosphate fertilizer, calcium magnesium phosphate fertilizer, and composite fertilizer.
2. Food industry: Vitamin malt extract, granular strong sugar.
3. Mineral products: manganese ore, pyrite, limestone, peat.
4. Other: feed, iron powder, flat soybeans, garbage abrasives, matchsticks, sawdust, distiller’s grains.

The feed drum dryer is mainly used to dry granular materials within a certain humidity range, such as yellow sand used in the dry powder mortar industry and various specifications of molding sand used in the casting industry. Blast furnace slag used in the building materials and cement industry. Small particle clay, used in the chemical industry for small particle materials that do not undergo chemical changes, are not afraid of high temperature and smoke pollution. According to the moisture requirements of different industries for dried materials, the moisture content of the dried materials can reach below 1-0.5%.

1. The drum dryer is one of the traditional drying equipment, with reliable operation, high flexibility, strong adaptability, and large processing capacity. It is widely used in metallurgy, building materials, chemical industry, coal washing, fertilizer, ore, sand, clay, kaolin, sugar and other fields.
2. A three cylinder dryer is a type of dryer that shortens the external dimensions of the dryer body by replacing the single cylinder body with three stacked cylinders. When the machine is in operation, materials and hot air flow enter the inner to outer cylinder in sequence. After the Z-shaped reciprocating flow of the machine body, the heat energy is fully utilized to dry the materials before unloading.
3. The full name of a box dryer is a box type fruit and vegetable dryer. This equipment dries evenly, with fast speed and high efficiency, and the materials are not easy to stick. It can achieve automatic temperature control and moisture removal, which can keep the dried materials in a better shape, maintain the color and shape of the dried materials, and improve product quality.